TAT-2025 2.0HP Oil Free Silent Air Compressor
TAT-2025 2.0HP Oil Free Slient Air Compressor
| MODEL | TAT-2025 | ||
| HP | 2.0 | ||
| RPM | 50Hz | 1400 | |
| 60Hz | 1700 | ||
| TANK | Litre | 25 | |
| Gallon | 6.6 | ||
| LIMIN | 50Hz | 137 | |
| 60Hz | 166 | ||
| CFM | 50Hz | 4.84 | |
| 60Hz | 5.86 | ||
| MAX. PRESSURE | bar | 10 | |
| psi | 145 | ||
| NOISE LEVEL | dB(A) | 62 | |
| G.W. | kg | 20 | |
| lbs | 44 | ||
| Package | PCS/CTN | 1 | |
| LxWxH(cm) | 61X32X61 | ||
| Container loading QTY. | 20" | 216 | |
| 40" | 456 | ||
Related products
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
-
Small Scale PE PP HDPE LDPE Films Bags Rigid Plastic Granulators Recycling Pelletizing Machine
Contact UsThis is multifunctional small plastic pelletizing line. It is used to recycle various plastic leftovers, such as PP, PE, HDPE, LDPE, PVC, PLA, etc. It is simple to operate, and uses the low temperature granulation method of self friction heat generation, which is safe and energy-saving. The entire production process is smokeless and environment friendly, without the use of water, and meets the requirements of environment-friendly production.
Reviews
There are no reviews yet.