Category: Machinery
Showing 145–160 of 488 results
-
Diesel 6BT 4BT Engine Spare Parts Fan Support 4932910 3909943
Contact UsThe 4932910/3909943 fan support, designed for 6BT and 4BT series diesel engines, is specifically used to secure the cooling fan, ensuring the stability and reliability of the engine’s cooling system. It is a key structural component in maintaining efficient engine operation within an optimal temperature range
-
Diesel Generator Set Low Voltage BDC1800GF 2250KVA 400V/50Hz Prime Power/ Cummins QSK60-G8
Contact UsApplicable Standards:
ISO 8528:Reciproacting Internal Combustion Engine Driven Alternating Current Generator Set
IEC 60034-1:Rotating Electrical Machines-Fundamental Technical Requirements
YD/T 502：Diesel Generator Set for Communication Use
GB/T 20136-2006：General Test Methods for Internal Combustion Engine Power Stations
Product Advantages:
Advanced electronic-controlled engine capable of compensating for load, temperature, fuel calorific value, and atmospheric pressure. This reduces engine wear, improves fuel efficiency and output power, and lowers NOx and particulate emissions.
Optimized combustion chamber geometry that enhances compression ratio and air–fuel ratio, ensuring thorough mixing of fuel and air. This significantly reduces pollutant emissions, while the lower piston temperature and in-cylinder pressure help reduce mechanical stress.
Integrated ductile-iron pistons that provide superior thermal expansion and contraction characteristics, improving cylinder durability by up to 15%.
New-generation high-pressure fuel injection system delivering improved atomization and more uniform distribution within the combustion chamber. This enhances cold-start performance, transient load response, and overall engine performance.Performance Guarantee:
The transient response of the generator set is fully tested in accordance with ISO 8528-5 standards.
Proven product design, quality, and performance integrity.
All engine systems are verified through prototype validation and factory testing. -
Distribution Fin Cutting Machine for Plate Fin Heat Exchanger
Contact UsThe distribution fins are ones of the important brazed components of the aluminum plate-fin heat exchanger. The cutting of the distribution fins is a key process in the manufacturing of the aluminum plate-fin heat exchanger. The production quality of the distribution fins directly affects the assembly quality and brazing quality of the core body. Therefore, mastering the cutting process of the distribution fins for aluminum plate-fin heat exchanger is a crucial step in improving the quality of aluminum plate-fin heat exchangers. However, the guide plates/ distribution fin isn’t regular rectangle which can be directly cutoff by fin machine but parallelogram, trapezoid etc, referring to the below table of distribution fins type. How to cut the irregular guide plates/ distribution fins? Better Tech specializes in providing dedicated guide plate cutting machines which can cut the distribution fins in automatic, high quality and safe modes and have been widely used for plate fin heat exchanger production.
-
Dovetail Collar Machine
Contact UsThe Air Duct Machine is a specialized device for processing air ducts. It can shear, bend and perform circular cutting on steel plates to produce air ducts, exhaust pipes and ventilation duct accessories of various shapes.
Widely used in fields like construction, machinery and mining, it provides reliable processing support for the production of ventilation and exhaust systems in these industries. -
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
DTZY1218 Three-phase four-wire prepaid smart energy meter
Contact UsThe three-phase four-wire prepaid smart energy meter is a modern and advanced instrument designed and manufactured based on the actual power consumption conditions of industrial users, which adopts large-scale integrated circuits, digital sampling processing technology and SMT process. The performance indicators of this meter comply with GB/T 17215.321-2021 Special Requirements for Electrical Measuring Equipment (AC)-Part 21: Static Active Energy Meters (Class A, Class B, Class C, Class D and Class E), and GB/T17215.323-2022 Special Requirements for Electrical Measuring Equipment (AC)-Part 23: Static Reactive Energy Meters (Class 2 and Class 3). In accordance with the requirements of IEC62053-21 and IEC62053-2 standards, it can be customized according to functional requirements to meet all technical requirements of multi-functional energy meters.
-
Dual-Station Core Mold Vibration Equipment
Contact UsThis equipment integrates mechanical, electrical, hydraulic, and automatic control technologies. It can produce concrete drainage pipes with various joint forms, featuring high production automation, high production efficiency, and a unique production process.
-
EA08A AVR Automatic Voltage Regulator for Generators
Contact UsThe EA08A AVR is an automatic voltage regulator specifically designed for small generator sets. Utilizing high-frequency switching technology, it monitors and stabilizes output voltage in real-time, ensuring precise voltage control during load fluctuations for single/three-phase generators
