SPS85-15 Slip-type Fine Wire Drawing Machine

SPS85-15 Slip-type Fine Wire Drawing Machine

Inlet wire diameter:Φ0.025mm- Φ0.050mmOutgoing wire diameter:Φ0.016mm- Φ0.030mm

Fine Wire Drawing Machine Overview

This servo fine wire drawing machine is designed for precision drawing of small-diameter    wires where stable drawing tension, accurate diameter control, consistent surface quality,    and uniform take-up are required. The machine supports inlet wire diameters from    approximately φ0.025mm to φ0.050mm and finished wire diameters from approximately    φ0.016mm to φ0.030mm.

With a maximum drawing speed of up to 1500m/min, a multi-die drawing configuration,    servo-controlled take-up, and automatic wire traversing, the machine provides a    practical solution for high-precision fine wire production.

Key Features

• Suitable for precision and fine wire drawing applications

• Inlet wire diameter range from φ0.025mm to φ0.050mm

• Finished wire diameter range from φ0.016mm to φ0.030mm

• Maximum drawing speed up to 1500m/min

• Up to 15 drawing dies in a 1+13+1 configuration

• Servo-controlled take-up system for stable wire tension

• Automatic wire traversing with a maximum traversing width of approximately 180mm

• Spray-type lubrication and cooling system

• Digital display and computerized control of operating parameters

• European-version machine configuration with a 10.3-inch screen

• Machine configuration can be customized according to wire material and production requirements

Technical Parameters

Applications

This fine wire drawing machine is suitable for applications requiring precise    small-diameter wire production and stable high-speed operation. Typical applications    include fine copper wire, electronic and electrical conductor wire, specialty alloy wire,    plated wire, bonding-related wire, and other precision wire products.

The actual machine configuration can be adjusted according to the material properties,    inlet wire diameter, finished wire diameter, required drawing speed, production capacity,    surface quality requirements, and take-up specifications.

Servo Take-Up and Automatic Wire Traversing

The machine is equipped with a servo-controlled take-up system designed to provide    stable and responsive control during fine wire production. Accurate take-up control    helps maintain consistent wire tension and reduces the risk of loose or uneven winding.

The automatic traversing system uses a lead screw-driven mechanism and servo motor    to distribute the finished wire evenly across the take-up reel. The forward and reverse    movement of the traversing system allows controlled wire arrangement with a maximum    traversing width of approximately 180mm.

Multi-Die Fine Wire Drawing System

The machine can accommodate up to 15 drawing dies in a 1+13+1 configuration.    Multiple drawing passes distribute the total reduction across several dies, helping    achieve a more controlled reduction process for small-diameter wire.

The standard reduction configuration uses approximately 6% reduction for the final    drawing pass and approximately 5% for the preceding pass. The actual reduction schedule    should be selected according to the wire material, mechanical properties, inlet diameter,    finished diameter, and required production performance.

Lubrication and Cooling System

Fine wire drawing generates heat and friction between the wire, dies, and drawing    components. This machine uses a fan-shaped spray lubrication and cooling system    equipped with a water tank and water pump.

Proper lubrication and cooling help reduce friction, control drawing temperature,    improve drawing stability, extend drawing die service life, and protect the surface    quality of the finished wire.

Electrical Control System

The machine uses a digital electrical control system for monitoring and adjusting    important operating parameters. The control system supports servo speed regulation    and computerized automatic control to improve the consistency of the drawing process.

The European-version configuration is equipped with a 10.3-inch display screen,    providing a convenient interface for machine operation and production monitoring.

Remarks

To achieve the specified technical performance, it is important to use high-quality    copper wire or other suitable raw materials, high-performance lubricants, properly    selected drawing dies, and a reasonable multi-pass drawing process.

Actual production speed and finished wire quality may vary depending on the wire    material, inlet and outlet diameters, drawing die condition, reduction schedule,    lubrication and cooling conditions, and required product specifications.

Frequently Asked Questions

Why Choose Our Servo Fine Wire Drawing Machine?

This machine combines multi-die fine wire drawing technology with servo-controlled    take-up and automatic wire traversing to provide a stable solution for small-diameter    wire production. The compact machine structure, digital control system, controlled    lubrication, and precision winding system make it suitable for manufacturers looking    for consistent production performance and reliable fine wire quality.

If you are looking for a fine wire drawing machine for copper wire, alloy wire,    plated wire, bonding wire, or other specialty materials, the machine can be configured    according to your actual wire diameter and production requirements.

Request a Customized Fine Wire Drawing Machine

Please provide your wire material, inlet diameter, required finished diameter,    target drawing speed, and take-up requirements. Our engineers can recommend a suitable    machine configuration based on your production process.