Pneumatic Angle Seat Valve
Valve body: CF8, CF8M, SS316L, 2205
Actuator: stainless steel
Seat sealing: PTFE, RPTFE, PEEK
Valve stem seal: PTFE, FKM, RPTFE
Piston seal: FKM, NBR
Nominal pressure (working pressure): 0-16bar (0-232Psi), optional vacuum as low as -0.9bar
Control pressure: 2-10bar
Control medium: clean compressed air, neutral gas, temperature: ≤ 60 ℃
External temperature (environment): -10 ℃~+80 ℃
Applicable media: water, neutral gases or liquids, alcohol, oil, fuel, steam, organic solvents, acid-base solutions, etc
Medium temperature: -10 ℃~+180 ℃ (PTFE room temperature type)
+25 ℃~+220 ℃ (PTFE high-temperature type)
Maximum viscosity: 600cst (mm2/s)
Valve leakage level: DIN EN 12266 Class A
Note: * The dimensions are the blank design dimensions (the actual dimensions may vary, for reference only)
|
Specification |
Actuator mm |
E |
H |
A |
L |
φD* |
S* |
|
DN10 |
50 |
60 |
141 |
140 |
70 |
17.4 |
3.8 |
|
DN15 |
50 |
60 |
141 |
140 |
70 |
22 |
3.25 |
|
DN20 |
50 |
60 |
145 |
149 |
80 |
27 |
3.75 |
|
DN25 |
63 |
75 |
167 |
174 |
100 |
34 |
4.25 |
|
DN32 |
80 |
94 |
200 |
217 |
125 |
39 |
3.75 |
|
DN40 |
80 |
94 |
200 |
217 |
130 |
45 |
3.75 |
|
DN50 |
80 |
94 |
208 |
229 |
150 |
57 |
3.75 |
Technical parameters
Interface nominal diameter: DN8-DN100 (1/4"-4")
Connection method: thread, welding, quick-install, flange, other methods for customized consultation
Valve body: CF8, CF8M, SS316L,2205
Actuator: stainless steel
Valve seat seal: PTFE, RPTFE, PEEK
Valve stem seal: PTFE, FKM, RPTFE
Piston seal: FKM, NBR
Nominal pressure (working pressure): 0-16bar (0-232Psi), vacuum as low as -0.9bar optional
Control pressure: 2-10bar
Control medium: clean compressed air, neutral gas, temperature: ≤60℃
External temperature (environment): -10℃ ~ +80℃
Applicable media: water, neutral gas or liquid, alcohol, oil, fuel, steam, organic solvent, acid and alkali solution, etc.
Medium temperature: -10℃~+180℃ (PTFE normal temperature type)
+25℃~+220℃ (PTFE high temperature type)
Maximum viscosity: 600cst(mm2/s)
Valve leakage level: DIN EN 12266 Class A
Features
1. Compact structure, high flow capacity;
2. Simple and fast commissioning;
3. Automatic stem correction (self-adjusting), self-lubricating, maintenance-free;
4. Visual position indicator rod;
5. Very suitable for high-frequency switching and quantitative operation;
6. Good adjustment characteristics;
7. The cylinder is made of stainless steel, performs well in harsh environments, has modular accessories, can be rotated 360°, and has a low maintenance rate. Stainless steel is particularly durable on steam and corrosive applications; has durable and reliable sealing elements, good sealing, tight closing, and long life;
8. Can be installed in any position (upward, flat or tilted), the cylinder is more suitable for upright position.
Related products
-
RO EDI
Contact UsOrisun group is specialize in supplying one stop solutions for whole manufacture chain. developing and manufacturing reverse osmosis water treatment for over 20 years.Our equipment is widely used in pharmacy industry , food and beverage industry , cosmetic industry , chemical industry, etc.As a leading provider of water treatment solutions ,our mission is to supply clean , healthy and safe water for all over the world.
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
Reviews
There are no reviews yet.