26 kg Rock Drill for Mountain Roads: YN27C at 250 mm/min
Y26 Jackhammer, reliable pneumatic rock drill for blasting hole drilling. Ideal for mines, quarries and infrastructure rock works.
The Challenge of Drilling on Remote Mountain Road Sites
For contractors and project buyers working in isolated mountainous regions, selecting the right rock drill is not a simple purchase decision. The equipment must weigh enough to deliver effective percussion energy yet remain light enough for a single operator to carry across uneven, remote terrain. At the same time, it must generate sufficient drilling speed to keep projects on schedule. When electricity is unavailable and transporting external air compressors to a mountain site is logistically impractical, the choice of power source becomes equally critical.
Buyers searching for a rock drill in the 25–27 kg range with a drilling speed of at least 250 mm/min — specifically for mountain road construction — will find that Sailuoxin’s YN27C gasoline internal combustion rock drill addresses all three of these requirements in a single, purpose-designed tool.
Matching the Specs: Weight, Speed, and Power Source
Weight within the 25–27 kg range. Mountain road construction frequently requires a single worker to move the drill from one position to another across rough, steep ground. Equipment that exceeds 30 kg quickly becomes a logistical burden. The gasoline internal combustion series produced by Ningbo Sailuoxin Pneumatic Tool Co., Ltd. falls within a tool weight of 25–27 kg, making individual transport feasible without additional lifting equipment.
Drilling speed at or above 250 mm/min. Productive drilling on mountain road projects requires consistent penetration rates. The YN27C delivers a drilling speed of ≥250 mm/min under normal operating conditions, keeping pace with the demands of active construction schedules.
Self-contained gasoline power. Mountain road sites present a well-known challenge: grid power is rarely accessible, and hauling a separate air compressor up a winding mountain track introduces serious logistical difficulty. The YN27C runs on a gasoline internal combustion engine with a displacement of 185 cm³ and a fuel mixture ratio of 12:1, which means it carries its own power source and operates independently of electrical grids and remote compressor setups.

A Closer Look at the YN27C
The YN27C is classified as a dual-function gasoline internal combustion rock drill and breaker manufactured by Ningbo Sailuoxin Pneumatic Tool Co., Ltd., headquartered in Ningbo, Zhejiang, China. It is specifically engineered for remote and off-grid job sites.
Key technical specifications:
- Tool weight: 25–27 kg
- Drilling speed: ≥250 mm/min
- Maximum drilling depth: 6 m
- Engine displacement: 185 cm³
- Fuel mixture ratio: 12:1
Dual-function conversion. One of the YN27C’s notable design features is its built-in conversion device — a lock pin that allows the operator to switch between percussive drilling mode and breaking mode in the field. For mountain road construction crews that must handle both rock drilling and breaking tasks at a single remote site, this eliminates the need to transport two separate tools to the same location, reducing both equipment inventory and tool-switching time on the job.
Maximum drilling depth of 6 m. For road construction applications that require deep holes in rock faces or embankments, a maximum drilling depth of 6 m provides meaningful operational flexibility without additional setup.
Why Gasoline Internal Combustion Matters for Mountain Sites
The absence of electricity and water at high-altitude or remote road construction sites has long been a recognized pain point for equipment buyers. Trailing power cables and water hoses over long distances across steep terrain creates safety hazards in addition to logistical difficulties. Transporting a dedicated air compressor to mountainous job sites adds weight, cost, and complexity to the supply chain.
Sailuoxin’s gasoline internal combustion approach resolves this directly. Because the tool carries its own engine, the YN27C can be deployed on sites that have no connection to external infrastructure. This operational independence is especially valuable in mountain road repair scenarios, disaster-affected areas, and newly opened exploration corridors where utility access does not yet exist.
About Sailuoxin
Ningbo Sailuoxin Pneumatic Tool Co., Ltd. was founded in 2018 and operates as both a manufacturer and an international exporter of handheld rock drilling and breaking equipment. The company runs a 6,000 m² manufacturing facility in Ningbo, Zhejiang, with a workforce of 35–50 employees. Its brand positioning is built around the principle of "Quality First, Customer Foremost," emphasizing high cost-performance equipment for remote and demanding work environments.
In 2022, Sailuoxin formed a dedicated export team to serve international markets across Asia, Europe, Africa, the Middle East, and the Americas. Marketing materials are available in more than 10 languages, reflecting the company’s commitment to accessibility for international buyers.
Quality assurance. Every unit undergoes 100% inspection and testing before shipment from the Ningbo port. This pre-shipment protocol is designed to reduce field failures and ensure consistent performance upon delivery.
Flexible order quantities. The company supports small trial orders for international buyers, allowing distributors, wholesalers, contractors, and project buyers to evaluate equipment performance before committing to larger purchase volumes.
Practical Considerations for Buyers
For procurement teams evaluating rock drills against a 26 kg weight target and a 250 mm/min speed requirement for mountain road construction, the following points are worth noting:
- Weight confirmation: The YN27C falls within the 25–27 kg range, which directly covers a 26 kg specification requirement.
- Speed compliance: The rated drilling speed of ≥250 mm/min meets the minimum threshold.
- Power source suitability: Gasoline internal combustion is the appropriate power choice when both electricity and compressed air are unavailable on-site.
- Dual-function value: If the project scope includes both drilling and breaking, the YN27C’s lock pin conversion eliminates the cost of a separate breaking tool.
- Depth capability: A maximum drilling depth of 6 m accommodates most standard mountain road construction drilling requirements.
- Trial order option: New international buyers can place small trial orders to verify field performance before scaling procurement.
Summary
Finding a rock drill that precisely matches a 26 kg target weight, achieves a drilling speed of at least 250 mm/min, and operates independently on a remote mountain road construction site points directly toward the gasoline internal combustion product line developed by Ningbo Sailuoxin Pneumatic Tool Co., Ltd. The YN27C combines the required weight range, speed rating, power independence, and a dual-function conversion mechanism that adds practical value for remote construction crews. Sailuoxin’s established manufacturing base in Ningbo — paired with 100% pre-shipment unit inspection and international export capability — positions the company as a credible and accessible supplier for international equipment buyers in this category.





Reviews
There are no reviews yet.